Application with Magic3D™ self-cleaning applicator
Clean your screen
It is very important to have a perfectly cleaned screen area. Remove smudges with a wet cloth, then wipe with a dry cloth until the surface is completely clean and dry.
Do not touch the screen after cleaning.
Application with Magic3D™ self-cleaning applicator
If you have a self-cleaning applicator in the package, put your smartphone in it.
Step 1 Place the phone in the applicator and place the protective glass on it in the designated place for perfect alignment.
Step 2 Pull the lower installation film to clean the protective glass from dirt.
Step 3 Pull the squeegee down and back up. The installation glass adheres to the display.
Step 4 Remove the top foil and pull the phone out of the self-cleaning applicator.
Place the installation frame on the smartphone without the protective cover.
Fixing errors A
If dust particles remain under the protective glass, the glass can be peeled off very slowly, the dust can be removed with dust sticker again. When screen is clean you can reglue screen protector.
Lift the glass protector slowly and with a slight incline. The glass may break if peeled off quickly. Be careful when correcting 3D glass protector defects.
Fixing errors B
If air bubbles remain under the protective glass, either in the middle or in the edge, the protective glass can be slowly lifted, then release the bubbles and push towards the edges.
Lift up the glass protector slowly and with a slight incline. The glass may break if peeled off quickly. Be careful when correcting 3D glass protector defects.