Application with MagicEco™
self-cleaning applicator
Clean your screen
It is very important to have a perfectly cleaned screen area. Remove smudges with a wet cloth, then wipe with a dry cloth until the surface is completely clean and dry.
Do not touch the screen after cleaning.
Application with MagicEco™ self-cleaning applicator
If you have an MagicEco self-cleaning applicator in the package, put your smartphone in it.
Step 1 Peel off the white stickers in the applicator to reveal the adhesive surfaces for a better grip on the smartphone. Take the MagicEco applicator, which has a USB-C plastic end. Plug it into your phone’s USB-C port. This step fixes the phone and ensures its stable position.
Step 2 Place the glass protector over the phone display, place the tempered glass protector on it in the designated place for perfect alignment.
Step 3 Pull the lower installation film to clean the protective glass from dirt.
Step 4 Remove the top protective film and take the phone out of the self-cleaning applicator.
After applying the glass, press the display with your finger and swipe down for better adhesion of the glass to the display.
Fixing errors A
If dust particles remain under the protective glass, the glass can be peeled off very slowly, the dust can be removed with dust sticker again. When screen is clean you can reglue screen protector.
Lift the glass protector slowly and with a slight incline. The glass may break if peeled off quickly. Be careful when correcting 3D glass protector defects.
Fixing errors B
If air bubbles remain under the protective glass, either in the middle or in the edge, the protective glass can be slowly lifted, then release the bubbles and push towards the edges.
Lift up the glass protector slowly and with a slight incline. The glass may break if peeled off quickly. Be careful when correcting 3D glass protector defects.